- 产品名称：肯天含硅脱模剂 Lusin® Alro OL 153 S
- 添加时间：2015-11-02 15:35:33
Lusin® Alro OL 153 S
Universal silicone release agent for plastic and elastomer processing
- for use up to 150°C mould temperature
- easy demoulding
- wide range of application
- can also be used as a lubricant
- long cycle time in mould – multiple demoulding
Typical Performance Characteristics(Code N° 203250):
|Solid content (% by weight)||Approx. 40|
|Flash point||< -18 °C|
LUSIN®ALRO OL 153 S is a universal release agent for demoulding of thermoplastic, thermosets and elastomer parts up to a mould temperature of 150 °C.
It is based on non-reactive silicone oils (dimethylpolysiloxanes) which are absolutely colourless and have no smell.
- excellent release and slip effect
- long cycle times – multiple demould possible
As a release agent for demoulding of thermoplastics,thermosets and elastomers (except for silicone rubber). As a release agent and lubricant in the printing and packing industries. As a lubricant and polish for rubber and plastic parts.
Instructions for use:
Apply a fine even spray film to the clean mould paying particular attention to corners and undercuts.
To provide gloss the product should be applied as a fine film. Do not apply to parts which are to be treated(lacquered, galvanized, etc.)
Shelf life :
- 12 months
- Spray : 2 years
Storage / Handling:
For further information on storage, handling, hazards,etc. please refer to safety data sheet.
- spray can 400 ml / 12 cans per carton
Code No:: 001090
- ready-to-use / 1 l, 10 l, 20 l, 200 l,
Code No:: 203250
标签： 脱模剂 含硅 通用型