- 产品名称：肯天电子封装脱模剂 Lusin® Alro OL 201 S
- 添加时间：2015-11-02 15:35:33
Lusin® Alro OL 201 S
Multi-purpose silicone release agent for processing thermoplastics, thermosets and elastomers
- mould temperature up to 200 °C
- multi-purpose release agent
- long service lifde
Typical Performance Characteristics:
|Colour / appearance||Liquid, colourless|
|Solid content, %||1.9 – 2.2|
|Flash point, °C||< -18|
|Refraction index (20°C)||1.4001 – 1.4061|
LUSIN® ALRO OL 201 S is a multi-purpose silcone release agent. Its active ingredient consists of special silcone mixtures LUSIN®ALRO OL 201 S is suitable for temperatures up to 200 °C.
Other characteristics include:
- excellent adhesion on metal surfaces
- long service life (several release cycles are possible)
- extremely fine release film ensuring dimensionally accurate components
LUSIN® ALRO OL 201 S in canisters is a ready-touse,sprayable release agent containing a mixture of flammable organic solvents.
Multiple demould release agent for processing thermoplastic materials, especially thermoplastic polyurethanes.
Also suitable for processing rigid structural PUR foams, hot and cold curing epoxy and polyester resins, elastomers such as ethylene-propylene terpolymers (EPDM), nitrile rubber (NBR), fluorinated elastomers (FKM) and sulphochlorinated elastomers (CSM).
Spray a fine film onto the clean mould paying particular attention to edges and undercuts.
spray: approx. 2 years
canned product: 12 months
Storage / Handling:
For further information on storage, handling, hazards,etc. please refer to safety data sheet.
spray 400 ml (12 aerosols per carton)
Code No: 111010
canisters 1l, 5l, 20l, 200l
Code No: 213060
标签： 脱模剂 含硅 通用型