- 产品名称：肯天无硅氟素脱模剂 Lusin® Alro LL 261
- 添加时间：2015-11-02 15:35:33
Lusin® Alro LL 261
Silicone-free release agent for processing thermoplastics,thermosets and elastomers
- mould temperature up to 260 °C
- separating agent on PTFE basis
- suitable as a sliding agent
- Wide service range
Typical Performance Characteristics:
|Flash point, °C||≈ 0|
|Solid content, %||≈ 7.5 – 8.0|
Lusin® Alro LL 261 is a silicone-free release agent with a base of PTFE bonded coating. It is suitable for temperatures up to 260°C.
Other characteristics include:
− white colour, air-drying
− good adhesion on metal, plastics, wood
− excellent release and sliding effect
− long service life (several release cycles arepossible)
− secondary treatment is possible, e.g. painting,printing, gluing (compatibility test is required)
Do not bring into contact with tobacco products.
Multi-cycle release agent for processing thermoplastics, thermosets and elastomers if a dry release agent is required.
Sliding agent and lubricant for slideways, e.g.packaging machines, domestic appliances, furniture,for plastic/metal or plastic/wood material combinations.
Shake or stir well before use. Spray a thin film onto the clean moulds.
- approx. 12 months for sprays
- approx. 12 months for canisters
Storage / Handling:
For further information on storage, handling, hazards,etc. please refer to safety data sheet.
− Spray: 400 ml(12 aerosols per carton)
Arttiiclle no.. 101060
− Canisters: 1L, 5L, 20L
Arttiiclle no.. 213120
标签： 脱模剂 无硅 PTFE 通用型